12 Major Kubota RTV X1140 Problems and Solutions

Do you own a Kubota RTV-X1140? Or, are you planning to own one? If any of these answers are yes, then you are on the right article.

It is a well-built UTV which maybe every heavy driver wants to own. But, like every other vehicle, this UTV can give you different issues. 

So, we are going to discuss a few of its potential issues and their solutions, which you should know. 

The most common kubota rtv x1140 problems are transmission issues, overheating, windshield issues, brake troubles, starting problems, loose drive shaft, and power steering problems.

12 Kubota RTV X1140 Problems and Solutions:

Here are 12 potential issues that some users have reported with the Kubota RTV-X1140:

1. Transmission Issues 

Users have reported problems with shifting gears or transmission slippage. You can hear different weird voices from your engine which will indicate transmission issues. It can also happen that any of your clutches fail.

Solution: Check transmission fluid levels and condition. We suggest you only use prescribed or quality fluid. Also, check the clutches and replace the faulty ones.

2. Overheating

 Some RTV-X1140s have experienced overheating issues, possibly due to cooling system problems.

Solution: Ensure proper coolant levels and clean the cooling system. Consider upgrading to a higher-capacity radiator if overheating continues.

You may also read Kubota RTV 500 Problems and Solutions

3. Windshield Issues

Some owners are complaining that they can’t install windshields on the plastic roof. There are not many complaints about installing windshields on the metal roof. Use the user’s manual for installing both roofs.

Solution: You should keep the interior roof mounting bolts removed while installing the windshield on the plastic roof. Reinstall the plastic roof when the shield is placed.

4. Brake Troubles

 Users have mentioned issues with the braking system, including reduced stopping power or brake pedal feel. Some complained that cars keep going even if brakes are applied.

Solution: Inspect and replace worn brake components, and bleed the brake system if necessary. Inspect brake lines from the master cylinder to the brake calipers with a clean sheet of paper. If leakage is there, you need to stop it by putting pressure.

5. Starting Problems

 Some units have had difficulty starting, possibly due to ignition system issues or fuel system problems.

Solution: Check the ignition system, fuel delivery, and battery. Low-charged batteries can be the reason for this issue too. Address any faulty components to improve starting reliability.

6. Loose Drive Shaft

 Unusual sounds such as squeaking, clicking, or knocking can be heard when this issue is there. Moreover, your driveshaft will not rotate appropriately. 

Solution: You may need to replace your U-joint. The bushing or bearing that supports your driveshaft may wear out and need replacement. A squeaky noise can indicate that your driveshaft needs lubrication. 

7. Power Steering Problems

 Problems with power steering functionality can impact maneuverability and control.

Solution: Check power steering fluid levels and the system for any issues. Consult a mechanic for proper diagnosis and repair.

8. Carburetor Issues

Your engine may not be starting because of carburetor issues. Even if fuel is there, your engine may not work.

Solution: You have to spray some carburetor cleaning and check if the engine starts. If it doesn’t, it means there is a compression issue and you need to consult an expert for it.

9. Oil Leaks

Leaking oil can be a sign of gasket or seal problems, potentially leading to engine damage.

Solution: Identify the source of the leak and replace faulty gaskets or seals. Monitor oil levels to prevent engine damage.

10. Hydraulic System Issues

 Some RTV-X1140s have encountered problems with the hydraulic system, affecting various attachments and functions.

Solution: Inspect hydraulic lines, connections, and fluid levels. Consult a mechanic for proper diagnosis and repair.

11. Exhaust and Emissions

 Emission control system problems can lead to issues with exhaust emissions and engine performance.

Solution: Inspect the exhaust system for leaks and replace worn-out components. Address any emissions-related error codes.

12. Frame and Body Rust

 Some users have reported rust issues on the frame or body of the vehicle, particularly in humid or corrosive environments.

Solution: Sand down and treat rusted areas, then apply rust-resistant paint. Regularly clean and protect the vehicle’s frame and body.

As always, it’s important to note that not all vehicles will experience these problems, and some issues may arise due to lack of proper maintenance or harsh operating conditions. Regular maintenance, proper usage, and consulting with a qualified mechanic or Kubota dealer can help address and prevent these problems.

5 Tips to Maintain Kubota RTV-X1140:

Here are five tips to help you maintain your Kubota RTV X-1140:

1. Regular Inspections

Perform routine visual checks of the vehicle’s components, including tires, brakes, lights, and fluid levels. This helps catch any potential issues early on.

2. Fluid Maintenance

 Regularly check and change the oil, coolant, and other fluids according to the manufacturer’s recommendations. Clean fluids contribute to smoother operation and prolonged engine life.

3. Clean Air Filters

 Keep air filters clean or replace them as needed. Dirty filters can reduce engine performance and fuel efficiency.

4. Grease Moving Parts

 Lubricate moving parts such as joints, pivot points, and steering components with the appropriate lubricants to prevent wear and ensure smooth operation.

5. Proper Storage

 When not in use, store your RTV X-1140 in a dry, sheltered area to protect it from the elements. If exposed to harsh weather, consider using covers to shield it from rain, snow, and sunlight.

FAQs About Kubota RTV X1140 Problems:

Q: Which engine Kubota RTV-X1140 have?

Ans: The Kubota RTV-X1140 is typically equipped with a 4-cylinder, 24.8 horsepower diesel engine. 

Q: For what purposes Kubota RTV-X1140 is used?

Ans: You can use it for hauling feed, transporting tools, for different landscaping purposes, hunting trips, outdoor adventures, debris cleanup, and for off-road access.

Final Talk About Kubota RTV X1140 Problems :

So, Kubota RTV-X1140 can give you problems, but you can solve them easily. Just make sure that you address the problem at an appropriate time so that it can easily be resolved. Also, make sure to follow the maintenance tips we have discussed in this article.

Leave a comment